The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

mister.freeze · 02-22-2018, 01:49 PM

All emissions controls are gone. Tank has filler neck, pickup tube, and 2 other fittings. One of those is the vent to the filler neck. The other used to be a return line from the fuel injection. I now have a carb, so it is just plugged. The vent tube (purpose of this thread) is not connected to anything. Should i connect the currently plugged fitting to the vent tube?

02-22-2018, 01:49 PM	#7
mister.freeze Registered User Join Date: Dec 2003 Location: Houston, TX Posts: 734	Re: Fuel tube All emissions controls are gone. Tank has filler neck, pickup tube, and 2 other fittings. One of those is the vent to the filler neck. The other used to be a return line from the fuel injection. I now have a carb, so it is just plugged. The vent tube (purpose of this thread) is not connected to anything. Should i connect the currently plugged fitting to the vent tube? __________________ '72 K5, known as 'the Fox.' Last edited by mister.freeze; 02-22-2018 at 03:14 PM.