[rpmerf]

I'm still gathering parts for the swap on my 70 C20. I bought a 84 C20 with no engine or trans for $350 to grab the front suspension off of. My plan is to do a full front end rebuild while I am in there. New bushings, ball joints, tie rod ends, pitman arm, idler arm, master cylinder, hard lines, flex lines, calipers. I will have to see how the rotors, calipers, and pads look. They aren't too bad to change out afterwards, so I can let them slide if they aren't perfect. I am going to piece together everything from RockAuto using all Moog and AC Delco parts. I was able to find everything on RockAuto aside from the center link, spindles, and prop valve.