Re: Closed knuckle-ball clean up advice needed
About ten years ago, I packed all the bearings in my closed knuckle assembly with quality wheel bearing grease. The way you would in an open knuckle assembly, or a 2WD front wheel. I don't put any oil in the knuckle. I have been running this way since, with no issues. Granted, that's only been about 15k miles, but about half are highway. I do check often for heat and looseness of the hubs, and haven't had either. Something to consider. When first I took the knuckle apart, ten years ago, the outer wheel bearings were really dry, and the upper knuckle bearings too. Now, at least they have some grease in them...
|