Re: Fuel Gauge at Full
Okay this am I read 24 ohms at the tank 24 ohms at the gauge. That's with the extra 5 gallons in it.
Had 18 ohms less 5 gallons in it.
Gauge still doesn't move off empty.
I have 12V key on to the gauge.
I have verified grounds to the gauge and the sender at the tank.
And remember in post #11, I ran independent test leads to all points without using the onboard wire harness just to verify the same readings.
I dont know if it means anything but my Tachometer works, My clock works, my temperature gauge works, my voltage gauge works, I have gauge panel lights, wiper motor works... and it wouldn't if I didn't have grounds.
Last edited by The Rocknrod; 04-04-2021 at 11:27 AM.
|