The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dailydragger03 · 11-15-2008, 11:23 AM

Well no luck with the pic because my engine driven compressor for my suspension blocks everything on the driver's side of the motor. I was out in town this morning so I stopped by work and looked it up on mitchell. There are 6 different engine vin's, which is the eighth digit. If the engine vin is a W its on the rear of driver's cylinder head, T U or V its on the front of the driver's cylinder head, a 1 is on the front of the intake manifold in the center, a G is on the center of the right cylinder head. Here are a couple of part numbers incase you need them NAPA# ECH TS5732 or you can by delphi parts at napa now DELPHI# DEM TS10076. Hope this helps.

11-15-2008, 11:23 AM	#9
dailydragger03 Registered User Join Date: Jan 2007 Location: Sevierville/Cookeville TN Posts: 138	Re: Possible intake gasket leak Well no luck with the pic because my engine driven compressor for my suspension blocks everything on the driver's side of the motor. I was out in town this morning so I stopped by work and looked it up on mitchell. There are 6 different engine vin's, which is the eighth digit. If the engine vin is a W its on the rear of driver's cylinder head, T U or V its on the front of the driver's cylinder head, a 1 is on the front of the intake manifold in the center, a G is on the center of the right cylinder head. Here are a couple of part numbers incase you need them NAPA# ECH TS5732 or you can by delphi parts at napa now DELPHI# DEM TS10076. Hope this helps. __________________ 03 ext cab stepside silverado bagged on 20's with some other cool stuff (daily driver) 1970 c10 short step just gettin started on it (project)