The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Jason Banks** · 04-09-2024, 01:42 PM

Hey Clay,

I ordered this lug stud(Dorman 610-192):
https://www.rockauto.com/en/moreinfo.php?pk=1060301

Installed them and they are short, so I went looking for longer studs with the same diameter knurl and found this, which is .375 longer. depending on where I look it up(Dorman 610-073):
https://www.rockauto.com/en/moreinfo.php?pk=1060276

I didn't want to convert to the larger studs, so, It looks like these will work, assuming I can press .249" more knurl in the hub.

Did you look at doing something like this?

04-09-2024, 01:42 PM	#7
Jason Banks Senior Member Join Date: Dec 1999 Location: TX Posts: 1,528	Re: HO52 Wheel Stud Question Hey Clay, I ordered this lug stud(Dorman 610-192): https://www.rockauto.com/en/moreinfo.php?pk=1060301 Installed them and they are short, so I went looking for longer studs with the same diameter knurl and found this, which is .375 longer. depending on where I look it up(Dorman 610-073): https://www.rockauto.com/en/moreinfo.php?pk=1060276 I didn't want to convert to the larger studs, so, It looks like these will work, assuming I can press .249" more knurl in the hub. Did you look at doing something like this?