Re: Alternator warm with ignition off 1967 C10
Calling VetteVet.
Any suggestions? If I do hook up a single wire condenser, how is it wired in? I cannot locate a 2 wire condenser, as pictured in the original post.
With the new regulator, everything appears to be working correctly. Charge voltage is right at 14.8 volts. I have the old condenser wired in as it was before, and I get intermittent chatter from the regulator at idle... which is pretty annoying.
I suppose I could leave it, and hope the new regulator doesn't get damaged as the old one was.
Thanks.
|