|
Re: Suburban to Crew Cab Conversion- Possible?
Quote:
Originally Posted by iluvmy72
I'm confused on the whole thing in general. An Avalanche is a optional changing vehicle that goes from truck to SUV and back. Are you going to attempt this using a blazer top? Or is it a straight cut and weld up with the former rear interior now exposed like others in the pictures? It might be easier to use the frame of a suburban, remove everything from fenders back and mount a 4 door cab with a shortbed onto it. With good measuring it would probably fit perfectly.
|
If you already have a suburban and the ability, then it's probably cheaper to cut and weld. But, IMO, the reason for doing this would be to have a crew cab with more room behind the rear seat. I've thought about doing this, but I would want it to be like the actual Avalanche, and be able to open up the mid area, or close it up and have a crew. But, that results in a much more complicated job.
__________________
1995 Suburban K2500 454.....off road & towing
1999 Astro, work van
2006 Silverado 2wd 5.3 w/4.5" lift and 33s
Last edited by TheApocalyptican; 06-25-2011 at 10:58 PM.
|