Thread: 1970 c10 lwb
View Single Post
Old 03-05-2018, 09:56 PM   #2
KevinR
Registered User
 
Join Date: Apr 2011
Location: IN
Posts: 55
Re: 1970 c10 lwb

Started the project with the disk conversion. Got a little nervous about clearing 15 inch wheels (from a late model GMC) but squeaked by.

For vacuum, I’m using what I believe would be the stock port on the intake. No big issues with the process, but the power booster did necessitate a different air cleaner, valve cover breather, and moving a manual choke. Also, the 1/4 brake line for the front brakes was swapped for 3/16. If this doesn’t provide enough volume, I’ll run individual lines for each of the disks.

While I was doing the spindles (stock height), I replaced the upper and lower ball joints with Moogs from Summit.
Attached Images
    

Last edited by KevinR; 03-05-2018 at 09:58 PM. Reason: Adding photos
KevinR is offline   Reply With Quote