Front end disassembled and being prepped for the new spindles!
Cut 1 complete coil out of the spring, about 2” additional drop over the 2.5” spindles.
Spring and spindle reinstalled.
My dumb ass forgot to check the brake package before ordering the spindles...turns out this truck actually had the 1” rotors! So, perfect time to convert to JB5 rotors and calipers!
Caliper and new pads installed! I’ll have to wait until tomorrow on the hoses, they ended up being a day out.
Since the front end isn’t complete yet, enjoy another glorious rear end shot!
