The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What can be said about the 4-speed New Process NV833 overdrive manual transmission?

**Gregski** · 12-19-2015, 06:49 PM

then I decided to exercise the transmission a little bit, and noticed I had difficulty shifting between 1st and 2nd gear, not even using the shifter just holding the loose rod with my hand and trying to push it forward and pull it aft

I switched the rod to the 3rd and 4th gear and that one shifted fine by hand

so there was only one thing to do, that is peak inside the belly of the beast

first I noticed that two of the 10 bolts in the rosary have different washers and are a bit longer, what I didn't notice that there is a third bolt which itself isn't longer than the other 8 but does have a thicker neck, this proved to be a PIA in terms of getting it back in, in other words I forgot which hole it came out of

12-19-2015, 06:49 PM	#74
Gregski Post Whore Join Date: Aug 2014 Location: Sacramento, CA Posts: 10,803	Re: What can be said about the 4-speed New Process NV833 overdrive manual transmissio then I decided to exercise the transmission a little bit, and noticed I had difficulty shifting between 1st and 2nd gear, not even using the shifter just holding the loose rod with my hand and trying to push it forward and pull it aft I switched the rod to the 3rd and 4th gear and that one shifted fine by hand so there was only one thing to do, that is peak inside the belly of the beast first I noticed that two of the 10 bolts in the rosary have different washers and are a bit longer, what I didn't notice that there is a third bolt which itself isn't longer than the other 8 but does have a thicker neck, this proved to be a PIA in terms of getting it back in, in other words I forgot which hole it came out of Attached Images