The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Rust Therapy - 62 C-10

53Sparky · 01-06-2021, 11:45 PM

The area just below the tail light on the panel with all the bondo was full of lead, and there was some crude brazing as well. I'll have my hands full as I work through all of that. I thought I had taken a picture of it for the before/after, but somehow that didn't get saved, so you'll just have to imagine what the dent looked like. There was a crease just to the lower right of the tail light and 2 dents in the side and rear.

I couldn't access behind the dent, so I cut it out. Then I worked with a hammer and dolly until I got it to fit right again.

01-06-2021, 11:45 PM	#94
53Sparky Registered User Join Date: Nov 2013 Location: Northglenn, Colorado Posts: 186	Re: Rust Therapy - 62 C-10 The area just below the tail light on the panel with all the bondo was full of lead, and there was some crude brazing as well. I'll have my hands full as I work through all of that. I thought I had taken a picture of it for the before/after, but somehow that didn't get saved, so you'll just have to imagine what the dent looked like. There was a crease just to the lower right of the tail light and 2 dents in the side and rear. I couldn't access behind the dent, so I cut it out. Then I worked with a hammer and dolly until I got it to fit right again. Attached Images __________________ We'll burn that bridge when we get there My current project: Rust Therapy 62 C10 Numbers 6:24-26 Last edited by 53Sparky; 01-07-2021 at 10:14 AM.