The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - HOW TO: Replace Interior and Exterior Door Handles (1997 Yukon GT)

**lks dcvn** · 10-31-2008, 04:35 PM

Step 24. Prior to buttoning it up - be sure to spray the moving parts with white lithium grease.

Step 25. Raise the metal insert back into place making sure that it rests back on the metal tabs (2nd pic).

Step 26. Put the top of the plastic inner door panel on the window sill first and then line up the panel connectors prior to pushing it on all the way.

Step 27. Reconnect the wiring to the door switches and speaker and press it back into place.

10-31-2008, 04:35 PM	#10
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: HOW TO: Replace Interior and Exterior Door Handles (1997 Yukon GT) - with pix Step 24. Prior to buttoning it up - be sure to spray the moving parts with white lithium grease. Step 25. Raise the metal insert back into place making sure that it rests back on the metal tabs (2nd pic). Step 26. Put the top of the plastic inner door panel on the window sill first and then line up the panel connectors prior to pushing it on all the way. Step 27. Reconnect the wiring to the door switches and speaker and press it back into place. Attached Images