The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 03-18-2020, 08:28 AM

Another small addition to the pusher! A friend from our local truck club offered this box to me for free. Yesterday my neighbor & I cut it and welded it into the side of the bed of the pusher. I plan on painting it this afternoon. Got the keys with it also so now I can lock up stuff. It sit's low but it's the same height off the ground as the frame is so it shold be fine at least I hope so.

03-18-2020, 08:28 AM	#39
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: The Pusher! Another small addition to the pusher! A friend from our local truck club offered this box to me for free. Yesterday my neighbor & I cut it and welded it into the side of the bed of the pusher. I plan on painting it this afternoon. Got the keys with it also so now I can lock up stuff. It sit's low but it's the same height off the ground as the frame is so it shold be fine at least I hope so. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.