Quote:
Originally Posted by i heart square bodys
That acctually brings me to my next question ! it has an electronic speedo sensor , how do i go about changinging this?
Posted via Mobile Device
|
Same problem myself, there are speedo gear housings on epay, the gear that goes on the output shaft is the same diameter so might work if the ratio is right.
I had to cut the gear off the ouput shaft of the newer 700r4.
There is a clip that holds the plastic gear on the output shaft, you should be able to get it off your 350 trans.
Trouble I ran into is the speedo gear housing on my th350 is only about an inch big and the 700r4 is about a inch and a half.