The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - "Albert" -- 1949 AD, S10 Chassis

HUSSEY · 11-30-2015, 03:35 PM

I finally got around to getting the front bumper brackets made up. I used some 1/4 in. 2 in. flat stock with a 90 degree bend in them for the bracket to the bumper. This bracket then bolts to a bracket that I welded to the frame. Not sure why I needed a separate bracket that bolted in-between the frame and bumper but that’s what I came up with.

11-30-2015, 03:35 PM	#100
HUSSEY Registered User Join Date: May 2013 Location: Kansas City Posts: 572	Re: "Albert" -- 1949 AD, S10 Chassis I finally got around to getting the front bumper brackets made up. I used some 1/4 in. 2 in. flat stock with a 90 degree bend in them for the bracket to the bumper. This bracket then bolts to a bracket that I welded to the frame. Not sure why I needed a separate bracket that bolted in-between the frame and bumper but that’s what I came up with. __________________ My 49 AD Build / S10 Chassis -- Thread -- Pictures -- S10 Conversion Mounts