Re: A '54 named Busty
So here is our LS Swap - Progress Report Card - LSS-PRC
1. Mount the engine - Done!
2. Mount the transmission - Done!
3. Install heater core bypass - Done!
4. Plumb the power steering lines- Done!
5. Plumb the transmission fluid lines - Done!
6. Install the B&M shifter cable - Done!
7. Plumb the water pump - Done!
8. Install the shortened drive shaft - Done!
9. Install the exhaust manifolds and down pipes - Done!
10. Install the fuel pump and plumb the fuel system
11. Install the drive by wire throttle pedal
12. Install the engine wiring harness
13. Install the cold air intake
Last edited by Gregski; 06-27-2020 at 09:49 PM.
|