Re: 69 K10 From the Field
Getting ready for the motor removal and the install of the 292 I6 motor. Here is a list of what I have and what I have coming to do the task. Only item below that I have not finalized is going with new HEI distributor or freshen up existing distributor and stay with points.
Have these items:
freshly rebuilt motor that is John Deere green (needs green paint removed, new primer and paint)
292 4x4 cross member (needs cleaning, sandblasting and paint)
292 motor mount clam shells and spacers (needs cleaning, sandblasting and paint)
Motor mount pads (new)
finger guard shroud (has been sand blasted needs paint)
battery cables (new)
offset I6 air cleaner (needs sandblast, little metal work and paint)
Items I need:
paint for motor
-Quart Eastwood 2-part Chevy Orange Ceramic paint
-Quart Eastwood 2-part Gloss Black paint
-Eastwood 2K high temp primer
-Calyx Manifold coating
gasket set
clutch kit
carburetor
exhaust system
fuel pump
hoses and belts
spark plugs and plug wires
distributor cap, rotor, points ( might go HEI here)
coil if I dont go HEI
507 Light Blue paint for firewall (BC/CC)
Eastwood Chassis Satin black paint for frame (single stage)
oil , oil filter, antifreeze, fuel filter
battery
possible radiator, need to test old one first
|