The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*YoungPup1977* · 05-07-2018, 02:12 PM

Thanks for the diagram and the time it took to get it but its not what he has....reference post 19 please and you will see what is going on....the cable can only go so far and it pulls straight out from the TV cable.....

Also, The kink in the cable has nothing to do with anything because its outside of the cable itself....

Look at the very end of the TV cable in the pic, notice anything, its how the slack is taken out of the cable....its got a set screw that tightens against the metal cable....

I am not saying the cable is adjusted correctly, I am saying this cable and bracket will work is all....

The setup in post #4 is a detent cable for a T350, so the OP of this thread mislead us on which setup he had....post #4 indicated his LOOKED like that but later posted a pic of his actual setup in post #19

05-07-2018, 02:12 PM	#42
YoungPup1977 Account Suspended Join Date: Jun 2015 Location: No longer here Posts: 1,000	Re: Calling all 700R4 Experts! Thanks for the diagram and the time it took to get it but its not what he has....reference post 19 please and you will see what is going on....the cable can only go so far and it pulls straight out from the TV cable..... Also, The kink in the cable has nothing to do with anything because its outside of the cable itself.... Look at the very end of the TV cable in the pic, notice anything, its how the slack is taken out of the cable....its got a set screw that tightens against the metal cable.... I am not saying the cable is adjusted correctly, I am saying this cable and bracket will work is all.... The setup in post #4 is a detent cable for a T350, so the OP of this thread mislead us on which setup he had....post #4 indicated his LOOKED like that but later posted a pic of his actual setup in post #19 Last edited by YoungPup1977; 05-07-2018 at 02:22 PM.