|
Re: 10 gauge speaker wire for 2 12" subs.
The 10 guage should work fine but you will need to verify the resitance coming from the speakers do not over load your amp. Lets assume your subs provide a 4 ohm load by themselves, so depening on how you wire the subs together you could get an 8 ohm load or a 2 ohm load at the amp. If the subs are a 2 ohm resistance you could get a 4 or 1 ohm resistance at the amp. You will need to verify your amp can handle this load. If your not sure just list your subs and amp and we can verify them for you.
|