The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

theastronaut · 03-29-2014, 01:39 PM

Two high hump floor panels. Surface rust only, both are very solid. I do not have the matching firewall pieces. $125 each plus shipping.

The low hump panel does have the firewall section but is pretty rough. The front left corner needs repairs and it has a hole cut for a shifter. It's rough but could be usable if you can weld. The firewall section needs repairs to the left bottom corner but the right side is solid. $50 for both low hump pieces.

Send me your zip code for a shipping quote.

High hump panels:

Low hump panels:

Firewall piece:

03-29-2014, 01:39 PM	#1
theastronaut Registered User Join Date: May 2011 Location: Anderson SC Posts: 3,870	Two High Hump Panels, One Low Hump Two high hump floor panels. Surface rust only, both are very solid. I do not have the matching firewall pieces. $125 each plus shipping. The low hump panel does have the firewall section but is pretty rough. The front left corner needs repairs and it has a hole cut for a shifter. It's rough but could be usable if you can weld. The firewall section needs repairs to the left bottom corner but the right side is solid. $50 for both low hump pieces. Send me your zip code for a shipping quote. High hump panels: Low hump panels: Firewall piece: __________________ Project Goldilocks '66 C10 Short Fleet BBW Build '65 C10 Highly Detailed Stock Restoration Thread '78 Camaro Targa Roof Build '55 International Metal/Body/Paint Work '66 F100 Full Rotisserie Restoration '40 Packard 120 Convertible Coupe Restoration How To Restore and Detail an Original Gauge Cluster How To Detail Sand Body Panels, Edges, Corners, Etc Last edited by theastronaut; 04-04-2014 at 10:48 PM.