View Single Post
Old 12-16-2019, 11:04 AM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,916
Re: 18x12 backspacing question

The shorter width 6-lug 12bolts allow about ~10" of back space before you have clearance problems (if the wheel diameter clears) @ the suspension. I ran 15x14" wheels (9.75"BS??) w/widened tubs & the shorter width 12bolt

So, will your proposed combo's 'fit' with the wider housing? They can. Will they look right? Only way to know is to measure your set-up. I would bet if the truck is lower than stock height, there will be issues @ the bedside requiring more back spacing. My best WAG is you need closer to ~8" BS w/the wider rear housing if the truck is lowered & you don't want to have to worry about rubbing @ the bedside.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote