The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 1956 Chevy 4x4 Big Block Mini-Thread

dsraven · 03-13-2024, 08:51 AM

unless you are the one who rewired it, I would go to the HEI and see what ga of wire is power supply, then follow it back to see where it goes, should be the ign switch, and see that the feed for the ign switch also has a large ga power feed (fused of course). Then follow the secondary wire at the starter and see where it goes, shouldn't be required with the proper ign switch installed.

03-13-2024, 08:51 AM	#19
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 7,844	Re: 1956 Chevy 4x4 Big Block Mini-Thread unless you are the one who rewired it, I would go to the HEI and see what ga of wire is power supply, then follow it back to see where it goes, should be the ign switch, and see that the feed for the ign switch also has a large ga power feed (fused of course). Then follow the secondary wire at the starter and see where it goes, shouldn't be required with the proper ign switch installed.