The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - JackdTruck - the overly ambitious 1969 K10 LWB Project

ZohmBii · 07-31-2020, 12:09 PM

We finished installing the headers, A/C compressor, serpentine belt, fuel tank, and mounted the Holley Sniper.

Time to slap the cab onto the frame for the final time!

The fuel tank was from Brother's Trucks, since the truck was going to be lifted we didn't want to have the filler neck in the bed so we put it inside the wheel well. We also installed the Holley Sniper Fuel Pump module in the tank.

Some more shots of the cab:

Here's some shots underneath, you can really see how the headers fit:

07-31-2020, 12:09 PM	#39
ZohmBii Registered User Join Date: Mar 2018 Location: Looking for braaaains in Salt Lake City, UT Posts: 49	Re: JackdTruck - the overly ambitious 1969 K10 LWB Project We finished installing the headers, A/C compressor, serpentine belt, fuel tank, and mounted the Holley Sniper. Time to slap the cab onto the frame for the final time! The fuel tank was from Brother's Trucks, since the truck was going to be lifted we didn't want to have the filler neck in the bed so we put it inside the wheel well. We also installed the Holley Sniper Fuel Pump module in the tank. Some more shots of the cab: Here's some shots underneath, you can really see how the headers fit: __________________ 1969 K10 LWB - 383/SM465/T221/4.56 - 8" of lift and 40" tires - the broski's truck aka JackdTruck 1974 C30 Crew Cab Dually - No Eng/No Trans/Bagged sometime in the 1990s and will be worked on sometime in the 2020s ... And a whole gaggle of other projects. Check out what I'm up to on Instagram: @zohmbii