After buttoning up a few items and filling fluids we were finally ready to start the truck up for the first time!
Engine ready to rock:
Exhaust supported - we didn't have hangers figured out yet
The startup process for the Holley Sniper and Hyperspark is pretty simple, but we had a few issues with it not wanting to start. Long story short, don't get so excited to put things together that you forget to adjust your idle screw when you put the unit on your engine or it can't breathe.
Once I cracked the throttle while cranking the engine it fired right up! We still had to do some fine tuning, but for now it was running and we were stoked!
I've uploaded a couple videos to YouTube if you'd like to check it out.
Little bro, Jack, starting the his truck for the first time and revving it a little:
https://youtu.be/ozlmQvvKn-s
Walk around of the truck running, showing the gauges and Sniper handheld:
https://youtu.be/Vmji5LFQHdQ
__________________
1969 K10 LWB - 383/SM465/T221/4.56 - 8" of lift and 40" tires -
the broski's truck aka JackdTruck
1974 C30 Crew Cab Dually -
No Eng/No Trans/Bagged sometime in the 1990s and will be worked on sometime in the 2020s
... And a whole gaggle of other projects.
Check out what I'm up to on Instagram:
@zohmbii