Quote:
Originally Posted by reaper71
This is the wiring I ended up with. Hope this helps.
And the resistors were used for the tail lights (LED Only) With this setup You do NOT need any relays.
Mark
|
Just to clear things up a bit, you are referring to not needing relays to run the LED tail lights. You are also running a dash mounted cruise switch, the only aftermarket switch that has the same style internal switches as a factory GM switch. At the start of this thread however, the relays used are for using an aftermarket column mounted cruise switch, which will need the relays. Hope this clears things up for anyone in the future that sees this thread.