[IronCanine]

The parts book diagram shows three hangers. One from the flag style frame bracket in front of the muffler, one aft of the muffler at the rear edge of the cross member, and then from a tab bracket on the frame rail for the tailpipe. I don't think that's how this truck came. The flag style frame bracket on this truck has a high arch. The one pictured in the parts book is flat and what I was familiar with on the Blazer and later model 4x4s. On the Blazer it was at the level of the transfer case. On this truck it is farther back...which means, even if you put the muffler as far forward as you can relative to this bracket..the muffler still extends past the crossmember where mounting point "A" (as labeled in the book) would connect. So we just hung it at the front and rear frame rail brackets and it seemed just fine. If it were a LWB or if the forward bracket were at the level of the transfer case...I think we could have used all three mounting points.