|
Re: Can't find misfire
There is a piece of equipment that is made for testing the ignition modules. I actually triggers the module and make sure is works while it heats up the module. A common problem is for the module to fail as it gets hot. Nothing you can do at home compares to this test.
If it does not pass their test replace it for sure.
If it does pass the test, it does not mean it is flawless, and may still need to be replaced.
As stated before, make sure you use heat sink compound under the module.
__________________
For those of you that are wondering why you are not getting replies to your thread:
Did you give the model, year, engine, fuel system type, and transmission information?
If it is modified from what came stock from the factory, let us know that too.
|