Quote:
Originally Posted by phase_one
AussienNC. Wire from the switch on the transmission to the plug that plugs into the neutral safety switch? The column does not have a neutral safety switch.
|
Identify which wire on the neutral start switch supplies power to the reverse lights....
Note....make sure the reverse lights correctly function and have a good ground before you start.
Find the reverse light switch on the T-5 and test it using a multimeter to make sure it completes a circuit only when the trans is placed in Reverse.
Run two wires down to the reverse light switch and connect one wire to each terminal on the switch....
Inside the cab, one wire connects to the wire on the neutral start loom that feeds to reverse lights and the other wire connects to a fused power source that is only hot when Ign switch is On....
Enjoy ! Hope this helps...
