|
Re: Factory sway bar for 4WD with leaf spring - need help, pictures
when i swap out riots i do a 7/16" drill bit threw the hole as 3/8" is sloppy in the hole . then i go get grd 8 7/16" bolts with a long smooth shank and washers to get it just right and let it fill 90% of the hole on all pieces being bolted . then i use stover nuts / crimped lock nuts NOT lock washers or nylock . i have yet to have one come loose on me .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .
EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
|