The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

4bynut · 03-11-2009, 08:26 PM

Looks like alot of fun.

I was wondering about your back brake setup. I'm running a 9" in my mud blazer also and want to put the dynalite on it too. I've seen the weld on brackets in speedway and plan on using the hats with matching wilwood rotors. My question is what brackets, hats, and rotors did you use. Mainly if you have a part # for the hats if they are back spaced enough for the weld on brackets or if there are some better brackets.

Thanks
Jason

03-11-2009, 08:26 PM	#17
4bynut Senior Member Join Date: Mar 2004 Location: Morrison, IL Posts: 793	Re: Prostreet / Dragrace 1972 blazer Looks like alot of fun. I was wondering about your back brake setup. I'm running a 9" in my mud blazer also and want to put the dynalite on it too. I've seen the weld on brackets in speedway and plan on using the hats with matching wilwood rotors. My question is what brackets, hats, and rotors did you use. Mainly if you have a part # for the hats if they are back spaced enough for the weld on brackets or if there are some better brackets. Thanks Jason __________________ 2007 Chevy 2500HD crew cab, 4x4, duramax w/Allison trans. 2001 Chevy ZR2 Ext. cab 4x4 (DD) 1967 Chevy SWB 4x4, BBC, Th400, NP205, 6" lift, and 35's (In Process) 1970 Chevy Blazer 4x4, BBC, TH400, NP241, 6" lift, and 38.5 boggers in front, 44 boggers on the rear ( mud racer project)