Re: Ram Assist Power Steering Rebuild w/Pics
Very nice restoration! When I decided to add power steering to my '67, I choose to install the 'correct' '67 ram type. I got lucky and found all the parts, including the very rare V-6 pump bracket. I also found that the control valve assembly is in fact the same used on Impalas and Corvettes, and I was able to purchase a new one from one of the classic Impala parts suppliers (Ecklers). I also found that the ram is the same type used on certain years of Impalas. There are 2 styles, and the only difference is were the ports are for the hydraulic lines. The hoses from the pump to the valve were not a problem, but I had to search around for a set of NOS hoses that go from the valve to the ram. Remember that there are places that can rebuild power steering hoses as long as the fittings are not screwed up.
__________________
1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.
|