The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Old School Kid · 03-22-2009, 07:59 AM

I forgot to confirm, JUST WANT TO MAKE SURE THAT I DO REMOVE THE REAR MOTOR MOUNT SUPPORT WHEN GONG TO A 350 WITH AUTOMATIC? CAN I REMOVE JUST THE CENTER SECTION OR DO I NEED TO REMOVE ALL OF IT, SINCE THE RIVETS ON THE UPPER SIDES ARE GOING TO BE A HARD TO IMPOSSIBLE TO GET TO?

Also can I , do I move the motor mount to the forward hole ( drill new for lower hole on bracket) to allow for more room at distributor? (using a long water pump, if that matters)

Thanks y'all, you are the only sounding board I have. Im a newbie at this.. Hopefully today will be as productive as yesterday..

03-22-2009, 07:59 AM	#109
Old School Kid Rottenwood Garage Member..Yes! Join Date: Oct 2008 Location: Marietta, Georgia Posts: 174	Re: 65 Old School Build on a Budget I forgot to confirm, JUST WANT TO MAKE SURE THAT I DO REMOVE THE REAR MOTOR MOUNT SUPPORT WHEN GONG TO A 350 WITH AUTOMATIC? CAN I REMOVE JUST THE CENTER SECTION OR DO I NEED TO REMOVE ALL OF IT, SINCE THE RIVETS ON THE UPPER SIDES ARE GOING TO BE A HARD TO IMPOSSIBLE TO GET TO? Also can I , do I move the motor mount to the forward hole ( drill new for lower hole on bracket) to allow for more room at distributor? (using a long water pump, if that matters) Thanks y'all, you are the only sounding board I have. Im a newbie at this.. Hopefully today will be as productive as yesterday.. Attached Images __________________ When interests become diversified, not all can be Barrett Jackson. Budgets and Accountants get in the way. My 65 (SOLD) http://67-72chevytrucks.com/vboard/s...d.php?t=317013 My 51 (SOLD) http://67-72chevytrucks.com/vboard/s...80#post3551880 Racetruck III (SOLD) http://67-72chevytrucks.com/vboard/s...72#post4254972 Rottenwood Garage and Speed Shop.....where everything must be racy! Gone to dark side for a while...1966 F100 in the stable