The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Rokcrln · 12-22-2007, 02:03 PM

Ok so now you need to remove the old bolts but try not to damage the holes as they will help to re-build. Then take the front fender mount and transfer the holes to the new A-Pillar patch. Then bolt the new patch inplace and mark the two remaining holes and mark the top of the A-pillar patch onto the old A-pillar. This mark will help out later. Then remove the A-pillar, drill the last holes then set this piece aside for now.

Kevin
LFD Inc.

12-22-2007, 02:03 PM	#6
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Rocker replacement 101 Ok so now you need to remove the old bolts but try not to damage the holes as they will help to re-build. Then take the front fender mount and transfer the holes to the new A-Pillar patch. Then bolt the new patch inplace and mark the two remaining holes and mark the top of the A-pillar patch onto the old A-pillar. This mark will help out later. Then remove the A-pillar, drill the last holes then set this piece aside for now. Kevin LFD Inc. Attached Images Last edited by Rokcrln; 12-23-2007 at 05:55 PM.