|
Re: Project "Poison Ivy" 54 GMC
thought I would post a few pics of what I did with the oil bath air cleaner to work with the 4.3... I cut the structure out of the inside so I basically had an empty can and lid.. I then took a 6" air cleaner assy and tacked the base plate to the bottom of the can. I did the same for the lid by tacking the air cleaner lid to the orignal lid.. All i have to do now is cut the original 2.5 inch neck off and weld a 3" neck on... I will weld a small bar across the neck with a nut to screw the stud to.. I am going to have it powder coated in a jet hot type of chrome like finish... Later today I will weld the notch in..
__________________
68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08
67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast.
64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten..
54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread...
07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind..
http://67-72chevytrucks.com/vboard/s...d.php?t=339340
See pics of my trucks in my profile
|