The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

First c10 · 02-03-2019, 11:53 AM

Worked on installing the LS harness on the motor. Had to shorten a few wires like the o2 MAF etc. Finished up the connectors for the rear lights, fuel pump, and fuel gauge wires.
Just waiting on th BIM module for the HDX gauges so I can wire the obd2 connectors.
Next to install radiator support to build a custom mount for the ECM and then build the wire loom to it hiding the wires in the fender.
I can’t believe how much time it has taken to get this wiring squared away. I literally have over a 100 hours in it.
GO RAMS!

02-03-2019, 11:53 AM	#771
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Worked on installing the LS harness on the motor. Had to shorten a few wires like the o2 MAF etc. Finished up the connectors for the rear lights, fuel pump, and fuel gauge wires. Just waiting on th BIM module for the HDX gauges so I can wire the obd2 connectors. Next to install radiator support to build a custom mount for the ECM and then build the wire loom to it hiding the wires in the fender. I can’t believe how much time it has taken to get this wiring squared away. I literally have over a 100 hours in it. GO RAMS! __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!