View Single Post
Old 05-30-2020, 09:06 PM   #2
71CHEVYSHORTBED402
Registered User
 
71CHEVYSHORTBED402's Avatar
 
Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,094
Re: Brake Dust Shield Question

This is all the info. I have. Pretty straight forward.

Brake dust shields: The dust shield positions with the domed hub facing out and the round portion of the parameter facing down and forward. The dust shield mounts to the spindle using three (GR 5) 1/2" hex bolts and lock washers. The bolt threads are 5/16-18 x 7/8. NOTES: The bolts are stamped "RSC". The original dust shields have to be bent outward with 2.1/2” drop spindles, because the shield rests on the lower control arm.
__________________
Tony
71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assm. guide "kit" for restoring it from ground up. With assys, the guide accts for 1000s of OEM identifications and part numbers, all written in short order. 700+ images include assm, illust., charts, and points of interest. Much of the info. applies to all 67-72 GM trucks, and to a lessor degree all 67-72 GM vehicles. My build thread, and more on the guide https://67-72chevytrucks.com/vboard/...d.php?t=730025
71CHEVYSHORTBED402 is offline   Reply With Quote