The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1981 K20 Project

skyphix · 10-02-2018, 06:07 PM

Love this project! Inspires me for mine since I've never welded anything like body panels before and only ever welded small square stock projects.

With regards to your ICM, I had a Honda that was killing them like yours is. Arctic Silver 5 solved that issue after trying all sorts of other products - Dia Grease, the cheap heat transfer sticky pads, etc. Did 50,000 miles on the ICM with Arctic Silver after losing 3 of the exact same brand/part number in a 1500 mile span.

10-02-2018, 06:07 PM	#181
skyphix Registered User Join Date: Sep 2018 Location: Hampden, ME Posts: 406	Re: 1981 K20 Project - The Blue Ox Love this project! Inspires me for mine since I've never welded anything like body panels before and only ever welded small square stock projects. With regards to your ICM, I had a Honda that was killing them like yours is. Arctic Silver 5 solved that issue after trying all sorts of other products - Dia Grease, the cheap heat transfer sticky pads, etc. Did 50,000 miles on the ICM with Arctic Silver after losing 3 of the exact same brand/part number in a 1500 mile span.