The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dimkapdx · 06-24-2009, 07:02 PM

I had the same exact problem with my 454. You are not going to like the answer, but I had to custom fabricate/improvise using the current mounts. I cut the mounts and the top is now mounted underneath the top of the frame rail, rather than on top. This was a good day's work, but no more clearance issues.

06-24-2009, 07:02 PM	#6
dimkapdx Registered User Join Date: May 2009 Location: Aloha, OR Posts: 18	Re: Headers hit the motor mounts I had the same exact problem with my 454. You are not going to like the answer, but I had to custom fabricate/improvise using the current mounts. I cut the mounts and the top is now mounted underneath the top of the frame rail, rather than on top. This was a good day's work, but no more clearance issues.