So another rainy day, another day in the shed.
Decided to make a temporary front crossmember and ended up bolting a piece of 100x50 between the chassis rails. Not pretty but its going to ensure the width stays the same during the chassis mods.
Once that was fitted I got into grinding, drilling and punching the factory welded rivets out of the engine subframe. Once I had blunted my 10, 9.5 & 9mm drills I finally got there and while it is still in the chassis rail it is now loose. I plan to just grind right through the middle of it and let it hit the floor.
Here is a link to a video of it on my youtube channel
Cheers
Q