a few more bits of stuff done. i have a bunch of weld finishing to do and the cab will be ready for the blaster and painter/body guy.
i cut way more out than was rusty, just to make sure there was nothing bad happening close to the area that was rusted through. i douched the in between area with rust convertor as best as i could, but there was nothing more than surface rust anywhere else
hopefully a minimal amount of filler will be required
rockers are all glued on. i am really glad i decided to try the panel adhesive. i used LORD Fuser. i still need to buff the ooze off but it is slow to cure in my cool garage
got the firewall converted to A/C and patched the little spot of rust in the blower motor area.
and i patched the lower cowl area. the inside was pretty clean but it had a bit of rust through in one area. the inside was covered in rust converter as well