The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Fabbed up some front sway bar mounts(PIC'S)

BobbyK · 02-10-2005, 03:00 PM

I reinstalled the sway bar yesterday and took a drive.

It REALLY tightend up the handleing.It feels like you get "pulled" through corners now

I also cleaned up the sway bar.Took about 6 hrs of sanding and polishing but I now have "blingin" front sway bar.
I clearc oated it and reinstalled the urethane bushings.Turned out o.k.

Here it is before

And here it is after.

02-10-2005, 03:00 PM	#4
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,769	I reinstalled the sway bar yesterday and took a drive. It REALLY tightend up the handleing.It feels like you get "pulled" through corners now I also cleaned up the sway bar.Took about 6 hrs of sanding and polishing but I now have "blingin" front sway bar. I clearc oated it and reinstalled the urethane bushings.Turned out o.k. Here it is before And here it is after. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by augie; 04-14-2011 at 02:25 AM.