The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1972 Chevy 4wd Longhorn Project: Never Ending Changes

**stllookn** · 11-03-2009, 02:07 AM

Dieselwrencher, I was just checking my 4x4 frame against my Longhorn frame the front is exactly the same width. It looks like an easy swap on front spring hangers and frontend. The transfer case mount looks to the be the same sort of easy switch. If the rearend remains the same you would only have to lengthen the driveline by about 8". What did I miss?

11-03-2009, 02:07 AM	#28
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,463	Re: Finally starting my Longhorn 4x4 conversion Dieselwrencher, I was just checking my 4x4 frame against my Longhorn frame the front is exactly the same width. It looks like an easy swap on front spring hangers and frontend. The transfer case mount looks to the be the same sort of easy switch. If the rearend remains the same you would only have to lengthen the driveline by about 8". What did I miss? __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)