Re: Wife's 48
Robert
Here are the pictures of the running board mounts you asked for of hussey's.I modified his so that the running boards could easily be removed. I used 1x2 tubing for both the L bracket that mounts to the frame and the runnng board bracket. I did also weld a piece of 1/8 inch plate to one side of the L bracket that mounts to the frame for strength(I'm a bit of a wide body myself). Hussey I believe used two brackets and I used three. I did have to notch the original running board brace so that the forked end could slide over the running board brace. After I had everything fit together I drilled a hole through the forked bracket and tapped the upper fork and installed a bolt from underneath.
|