The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**BigBird05** · 05-29-2021, 06:21 PM

with the column harness connected check to see if you have power on the white wire With brake pedal depressed . Check on the column side of the connector. If you do check to see if you have power on the dk green and yellow wires. Check on the column and the dash wiring side of the connector. If you have power there then move to the fire wall connector. Check on the under hood side of the connector. Then move to the rear harness connector located on the rear frame crossmember. If you have power there then remove the light bulbs and check the pig tail inside the tail light housing. If you have power there then it has to be a ground issue.

05-29-2021, 06:21 PM	#14
BigBird05 Senior Member Join Date: Aug 2019 Location: Cheraw Posts: 1,305	Re: Getting brake lights to work with the column harness connected check to see if you have power on the white wire With brake pedal depressed . Check on the column side of the connector. If you do check to see if you have power on the dk green and yellow wires. Check on the column and the dash wiring side of the connector. If you have power there then move to the fire wall connector. Check on the under hood side of the connector. Then move to the rear harness connector located on the rear frame crossmember. If you have power there then remove the light bulbs and check the pig tail inside the tail light housing. If you have power there then it has to be a ground issue.