The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

woodwright · 03-10-2009, 09:47 PM

Rokrln, Thanks for the complements. That really means alot coming from you.

The UCA towers are welded solid to the crossmember, and the shaft is welded solid to the towers. Then there is three 9/16" bolts that go thru the frame and the towers vertically similar to how they mount stock. Plus the three that come up through the bottom of the frame. I was trying to make it so I could still remove the crossmember. How would you brace it up more?

03-10-2009, 09:47 PM	#16
woodwright Enjoying left field Join Date: Jun 2008 Location: Dillon Montana Posts: 900	Re: Project GMC (Gonna need More Cash) Rokrln, Thanks for the complements. That really means alot coming from you. The UCA towers are welded solid to the crossmember, and the shaft is welded solid to the towers. Then there is three 9/16" bolts that go thru the frame and the towers vertically similar to how they mount stock. Plus the three that come up through the bottom of the frame. I was trying to make it so I could still remove the crossmember. How would you brace it up more? __________________ Clint 70 Chevy 4WD "Ultimate Work Truck" SOLD