The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

S_Gibson · 10-20-2018, 08:16 AM

Thanks for the photos. They show everything more clearly than anything I've seen thus far. My wires are zip tied to the brake lines on one side and heater hoses on the other. Two of the wires was on the manifold and burnt pretty well. I have an HEI distributor so I ordered wires for a 74-77 Corvette per a few post I saw on this site.

None of the shields or retainers are on the truck so I'll have to find everything required before installing the new wires and plugs. No point burning up a new set of wires. Where is the cheapest place to purchase everything needed. Do they sell the shields and retainers as a set?

10-20-2018, 08:16 AM	#20
S_Gibson Registered User Join Date: Jun 2018 Location: Winston Salem, NC Posts: 95	Re: OEM Plug wire stands/supports Thanks for the photos. They show everything more clearly than anything I've seen thus far. My wires are zip tied to the brake lines on one side and heater hoses on the other. Two of the wires was on the manifold and burnt pretty well. I have an HEI distributor so I ordered wires for a 74-77 Corvette per a few post I saw on this site. None of the shields or retainers are on the truck so I'll have to find everything required before installing the new wires and plugs. No point burning up a new set of wires. Where is the cheapest place to purchase everything needed. Do they sell the shields and retainers as a set? __________________ Stupidity was meant to be painful!