The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Lokar Shift Linkage from Column Shifter to 4L60E

t300 · 07-21-2016, 10:15 PM

I don't know what the 'right way' is but I just did the mechanical version yesterday. I took the U shaped original bracket that mounted to the inner frame rail, narrowed it about 3/4" as the 4l60e sits closer to the frame than original trans. then drilled new mount holes for it and that was about it. Same as factory essentially.

07-21-2016, 10:15 PM	#2
t300 Registered User Join Date: Mar 2013 Location: Manitoba Posts: 184	Re: Lokar Shift Linkage from Column Shifter to 4L60E I don't know what the 'right way' is but I just did the mechanical version yesterday. I took the U shaped original bracket that mounted to the inner frame rail, narrowed it about 3/4" as the 4l60e sits closer to the frame than original trans. then drilled new mount holes for it and that was about it. Same as factory essentially.