Quote:
Originally Posted by 88Stanger
May I ask where you got the power bleeder and the MC lids?
I have the adj. Prop valve all the way open. I know this is open because i used a pressure gauge 1st on the MC, each port, then on the prop. Valve and both had same # of about 1000lbs without vacuum ti the booster.
|
Check this out, this is the one I just got:
https://www.youtube.com/watch?v=2MmKaa3IVMo
There are a lot of different MC lid adapters available and you can buy a kit with the one you need.