The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1972 GMC Using 2003 Chevy 2500HD duramax Chassis

1tonwannabe · 11-22-2013, 06:13 PM

I have some pictures of how I did my brake pedal. I wanted to use the 2003 pedal. The 2003 has a large plate that mounts to the firewall. It has the hole for the steering column, and the hole for the brakes. I just lined the hole for the steering column of the plate, to the '72 hole on the firewall. Then I cut the holes out of the firewall to match the plate, and bolted it in. This puts the 2003 brake pedal too far to the left, so I had to bend it in the right location.
Here is a picture of the old brake pedal in it's original position, and the new pedal in it's original location.

11-22-2013, 06:13 PM	#124
1tonwannabe Registered User Join Date: Jul 2009 Location: Johnstown, Ohio Posts: 146	Re: 1972 GMC Using 2003 Chevy 2500HD duramax Chassis I have some pictures of how I did my brake pedal. I wanted to use the 2003 pedal. The 2003 has a large plate that mounts to the firewall. It has the hole for the steering column, and the hole for the brakes. I just lined the hole for the steering column of the plate, to the '72 hole on the firewall. Then I cut the holes out of the firewall to match the plate, and bolted it in. This puts the 2003 brake pedal too far to the left, so I had to bend it in the right location. Here is a picture of the old brake pedal in it's original position, and the new pedal in it's original location.